Products
Application Hints
Libraries
Errata
ZB1 Microcontroller Board
The ZB1 is a physical computing development system that is compatible
with the Arduino software environment. For system development a
variety of peripheral modules are available. The datasheet
is located
here
Features
- Replaceable and upgradeable CPU
- Compatible with the Arduino development tools.
- ATmega328 running at 12MHz with a Vcc of 3.3V.
- Socket for XBee Radio.
- 4.4" x 1.75" (uC + XBee). 2.7" x 1.75" if the board is cut to remove
the XBee radio. Both sections of a cut board are functional.
- I/O connections are wired to a single 26 pin header. Application boards can
be mounted parallel using vertical connectors, co-planar using
right-angle connectors or remotely using a flexible cable.
- The board can be built with either a USB interface
or with a six pin header for use with an USB to serial cable.
The USB interface circuitry includes transient
suppression.
- ICSP port (3.3V levels)
- A/D reference supply filtered per Atmel specification.
- Reset circuit per Atmel specification.
- Power supply is jumpered between either an LDO or an external
3.3V supply. The LDO input is diode or'ed from a wall adapter or the
USB 5V supply.
- Accessories include an LCD board and a prototyping board.
ZB1 Pricing
Assembled boards are assembled to order and typically ship within one business day.
| Part Number
| Description
| Price | Qty
|
|
| ZB1-KIT2
| datasheet
| ZB1, TH Kit, USB Header, No XBEE
| 25.00USD | | 1
|
|
|
| ZB1-KIT3
| datasheet
| ZB1, TH + SMD Kit, No XBEE
| 30.00USD | | 1
|
|
|
| ZB1
| datasheet
| ZB1 Assembled and Tested (USB Interface)
| 50.00USD | | 1
|
|
|
ZB1 Combos
| Part Number
| Description
| Price | Qty
|
|
| ZB1-KIT2+ZB1-PB1-KIT
|
| ZB1-KIT2 and ZB1-PB1-KIT
| 35.00USD | | 1
|
|
|
| ZB1-KIT3+ZB1-PB1-KIT
|
| ZB1-KIT3 and ZB1-PB1-KIT
| 40.00USD | | 1
|
|
|
ZB1 PCBs
| Part Number
| Description
| Price | Qty
|
|
| ZB1-PCB
| datasheet
| ATmega328 + XBee (PCB Only)
| 5.00USD | | 1
|
|
|
Accessories
The XBee is not included with the ZB1 kits.
The FTDI USB to Serial Cable
TTL-232R-3V3 is required to program
the ZB1 built with ZB1-KIT2. ZB1-KIT3 includes the surface mount components
to build the on-board USB interface.
| Part Number
| Description
| Price | Qty
|
|
| FTDI-TTL-232R-3V3
| datasheet
| USB to RS232 (3.3V TTL)
| 20.00USD | | 1
|
|
|
| MAXSTREAM-XB24-ACI-001
| datasheet
| XBee Series One, Chip Antenna
| 23.00USD | | 1
|
|
|
ZB1-KIT2 Component List
| Item Number
| Quantity
| Description
|
|
| 1
| 4
| capacitor, ceramic, 0.1uF, 10%, 50V, X7R
|
| 2
| 1
| capacitor, ceramic, 0.1uF, 16V, 0805
|
| 3
| 2
| capacitor, ceramic, 20pF
|
| 4
| 1
| capacitor, cereamic, 0.47uF
|
| 5
| 2
| capacitor, Nichicon UPW1E100MDD
|
|
| 6
| 1
| capacitor, ceramic, 4.7uF, 16V, 1210
|
| 7
| 3
| LED, T1, Green
|
| 8
| 1
| diode, dual, On-Semi MBR1545CTG
|
| 9
| 1
| fuse, 0.5A 1812
|
| 10
| 1
| header, RA, 13x2, 100mils
|
|
| 11
| 1
| header, 6x2, 100mils
|
| 12
| 1
| header, 6x1, 100mils
|
| 13
| 1
| header, 3x2, 100mils
|
| 14
| 1
| header, 2x2, 100mils
|
| 15
| 1
| header, RA, 3x1, 100mils
|
|
| 16
| 1
| power jack, 2.1mm
|
| 17
| 3
| header, 3x1, 100mils
|
| 18
| 1
| inductor, 10uH, 10%
|
| 19
| 1
| resistor, 10K, 1/4W, 1%
|
| 20
| 3
| resistor, 220 Ohm, 1/4W, 1%
|
|
| 21
| 2
| pushbutton
|
| 22
| 1
| switch, CK JS202011CQN
|
| 23
| 1
| ATmega328-20PU, 32K/1K/2K, 20MHz
|
| 24
| 1
| voltage regulator, 3.3V, 800mA, TO-220
|
| 25
| 1
| crystal, 12MHz, 20pF, HC49US
|
|
| 26
| 1
| DIP Socket, 28 Pin, 300mil centers
|
| 27
| 5
| Shunt
|
| 28
| 2
| Shunt with handle
|
| 29
| 2
| header, recptacle, 10x1, 2mm
|
| 30
| 1
| wiblock_ZB1-PCB
|
|
ZB1-KIT3 Component List
| Item Number
| Quantity
| Description
|
|
| 1
| 4
| capacitor, ceramic, 0.1uF, 10%, 50V, X7R
|
| 2
| 4
| capacitor, ceramic, 0.1uF, 16V, 0805
|
| 3
| 2
| capacitor, ceramic, 20pF
|
| 4
| 1
| capacitor, cereamic, 0.47uF
|
| 5
| 2
| capacitor, Nichicon UPW1E100MDD
|
|
| 6
| 1
| capacitor, ceramic, 4.7uF, 16V, 1210
|
| 7
| 3
| LED, T1, Green
|
| 8
| 1
| diode, dual, On-Semi MBR1545CTG
|
| 9
| 1
| fuse, 0.5A 1812
|
| 10
| 1
| header, RA, 13x2, 100mils
|
|
| 11
| 1
| header, 6x2, 100mils
|
| 12
| 1
| header, 3x2, 100mils
|
| 13
| 1
| header, 2x2, 100mils
|
| 14
| 1
| header, RA, 3x1, 100mils
|
| 15
| 1
| power jack, 2.1mm
|
|
| 16
| 3
| header, 3x1, 100mils
|
| 17
| 1
| Molex_67503-1020
|
| 18
| 1
| inductor, 10uH, 10%
|
| 19
| 1
| resistor, 10K, 1/4W, 1%
|
| 20
| 3
| resistor, 220 Ohm, 1/4W, 1%
|
|
| 21
| 1
| resistor, 10K, 0805. 1%
|
| 22
| 1
| resistor, 4.7K, 0805, 1%
|
| 23
| 1
| Yageo_9C08052A3302FKHFT
|
| 24
| 2
| pushbutton
|
| 25
| 1
| switch, CK JS202011CQN
|
|
| 26
| 1
| ATmega328-20PU, 32K/1K/2K, 20MHz
|
| 27
| 1
| voltage regulator, 3.3V, 800mA, TO-220
|
| 28
| 1
| FTDI_FT232RL
|
| 29
| 1
| TI_SN65220DBV
|
| 30
| 1
| crystal, 12MHz, 20pF, HC49US
|
|
| 31
| 1
| DIP Socket, 28 Pin, 300mil centers
|
| 32
| 5
| Shunt
|
| 33
| 2
| Shunt with handle
|
| 34
| 2
| header, recptacle, 10x1, 2mm
|
| 35
| 1
| wiblock_ZB1-PCB
|
|
Educational Kits and Rapid Prototyping Tools
