Modular Components

IBA

IBA-GNSS

IBA-S

IB4L

IB-PRO

IB125-ZB

WIBLOCKS

AMP

SENSORS

NOTES

BAGS

SYNTH

LOGIC-TILES

CASES

THEREMIN

BOXES

IB4L

The IB4L is an ARM (M4 core) based lighting controller that can connect, via Bluetooth, ZigBee or WiFi to a communication hub. Rapid deployment of lighting projects is possibly using a standard set of building blocks.

• ARM Cortex M4 Core
• Two on-board power DC/DC converters with 12 - 24VDC Inputs and 3.3VDC/1.5W, 12V/0.5W outputs
• Dual output 0-10V DACs.
• Isolated Input for standard 0-10V dimmers
• Radios available - 802.15.4, Zigbee, WiFi, Bluetooth
• Over The Air Programming (OTA) of multiple nodes at once.
• Memories - 2048K Flash, 160K SRAM
• Real-time Clock with battery backup
• Temperature Sensor
• USB 2.0 interface, 2 USARTs, 2 TWI interfaces,
• Two 3-channel 16-bit Timer Counters with capture, waveform, compare and PWM mode, Quadrature decoder logic and 2-bit Gray up/down counter for stepper motor
• 4-channel 16-bit PWM with complementary output, fault input, 12-bit dead time generator counter for motor control
• 32-bit Real-time Timer and RTC with calendar, alarm and 32 kHz trimming features
• Up to 16-channel, 1Msps ADC with differential input mode and programmable gain stage and auto calibration
• One Analog Comparator with flexible input selection, selectable input hysteresis