The PICOMIDI is a physical computing board that is compatible with the
Arduino software environment. The board size is 2.1" x 2.2".
All I/O pins from the ATmega328 are
brought out on 2 rows of 14 pins (300mil spacing). See the
PICO1TRC datasheet
for the
assembly instructions, schematic and bill-of-materials.
Features
- 2.1" x 2.175"
- Replaceable and upgradeable CPU (ATmega328)
- Compatible with the Arduino development tools.
- Adjustable Linear Regulator (Vcc 3.3V - 5V)
Output voltage is set by changing one resistor.
Resistors for 3.3V and 5V are included.
- ATmega328 running at 12MHz (Vcc 3.3V - 5V)
- Two rows of 14 pins (300mil spacing) with all ATmega328 I/O functions.
- Six pin header for an FTDI TTL-232R-3V3 cable.
- Debug LED that can be jumpered to Pin 7 or disconnected.
- A/D reference supply filtered per Atmel specification.
- Reset circuit per Atmel specification.
Pricing
Part Number
| Description
| Price | Qty
|
| PICOMIDI-KIT
| datasheet
| ATmega328 Kit with MIDI Interface
| 20.00USD | | 1
|
|
| PICOMIDI-KIT-F
| datasheet
| PICOMIDI + FTDI-TTL-232R-3V3 Cable
| 35.00USD | | 1
|
|
|
PICOMIDI-KIT Component List
Item Number
| Quantity
| Description
|
| 1
| 5
| capacitor, ceramic, 0.1uF, 10%, 50V, X7R
| 2
| 2
| capacitor, ceramic, 20pF
| 3
| 2
| capacitor, Nichicon UPW1E100MDD
| 4
| 2
| diode, 1N4148
| 5
| 1
| LED, T1, Green
|
| 6
| 1
| header, 3x1, 100mils
| 7
| 1
| header, 6x1, 100mils
| 8
| 1
| power jack, 2.1mm
| 9
| 2
| CUI_SDS-50J
| 10
| 1
| inductor, 10uH, 10%
|
| 11
| 1
| BJT, 2N3906
| 12
| 1
| BJT, 2N3904
| 13
| 5
| resistor, 10K, 1/8W, 1%
| 14
| 1
| resistor, 374 Ohm, 1/8W, 1%
| 15
| 1
| resistor, 124 Ohm, 1/8W, 1%
|
| 16
| 1
| resistor, 205 Ohm, 1/8W, 1%
| 17
| 2
| resistor, 220 Ohm, 1/8W, 1%
| 18
| 2
| resistor, 180 Ohm, 1/8W, 1%
| 19
| 1
| resistor, 100K, 1/8W, 1%
| 20
| 1
| pushbutton
|
| 21
| 1
| ATmega328-20PU, 32K/1K/2K, 20MHz
| 22
| 1
| voltage regulator, adj, 800mA, TO-220
| 23
| 1
| Fairchild_6N138
| 24
| 1
| crystal, 12MHz, 20pF, HC49US
| 25
| 1
| DIP Socket, 8 Pin, 300mil centers
|
| 26
| 1
| Shunt with handle
| 27
| 1
| DIP Socket, 28 Pin, 300mil centers, Wire Wrap
| 28
| 1
| wiblock_PICOMIDI-PCB
| 29
| 1
| resistor, 1K, 1/8W, 1%
|
|
|